Applicable Product(s)
- MSA12X
Procedure
First of all you need to know that MSA12X is defined as a Dante end-point, which means it has only 1 network interface card (Dante) therefore you can not change the IP from ControlSpace Designer.
To change the IP of the MSA, please follow these steps:
1. Open Dante Controller
2. Double-click on the device in the Routing View.
3. Select Network Configuration
4. Define the new address (DHCP/Static)
5. Press Apply
6. The MSA12X should now reboot automatically, if not, please reboot manually.